TIM_SelectOutputTrigger のバックアップ(No.3)

TIM_SelectOutputTrigger †

void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource)

TIM_TRGOSource
トリガ・出力モードのソースを以下のマクロから選択します。
TIM6とTIM7はTIM_TRGOSource_Reset,TIM_TRGOSource_Enable又はTIM_TRGOSource_Update のみをトリガ出力に出来ます。

TIM_TRGOSource	説明
TIM_TRGOSource_Reset	The UG bit in the TIM_EGR register is used as the trigger output(TRGO).
TIM_TRGOSource_Enable	The Counter Enable CEN is used as the trigger output (TRGO).
TIM_TRGOSource_Update	The update event is selected as the trigger output (TRGO).
TIM_TRGOSource_OC1	The trigger output sends a positive pulse when the CC1IF flag is to be set, as soon as a capture or compare match occurs (TRGO).
TIM_TRGOSource_OC1Ref	OC1REF signal is used as the trigger output (TRGO).
TIM_TRGOSource_OC2Ref	OC2REF signal is used as the trigger output (TRGO).
TIM_TRGOSource_OC3Ref	OC3REF signal is used as the trigger output (TRGO).
TIM_TRGOSource_OC4Ref	OC4REF signal is used as the trigger output (TRGO).

/* Selects the update event as TRGO for TIM1 */
TIM_SelectOutputTrigger(TIM1, TIM_TRGOSource_Update);